materials lumistik wall is made of seamless extruded corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. led is contained in a white translucent high impact uv stabilized acrylic sealed lens. the assembly is designed to provide a uniform illumination. electrical driver standard driver is 0-10v dimming-ready (dims to 10%) with: 120- 277 multi-volt compatibility (50-60hz), operating temperatures of -30oc/-22of to 60oc/140of, output over voltage protection, output over current protection, output short circuit protection with auto-recovery. led standard 4000k cct/80 cri. optional 3000k & 3500k. removable modular led platform. life 50,000hrs l 85 b 50 (based on iesna tm-21 test method and lm-80 data). finish five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting the mounting plate is designed to fit on a 2x4 (51x102) rectangular electrical box using 3.156 (80) c/c mounting holes. optional trimming plate for octagonal jbox (option mt4). certification tested to ul1598 and csa 22.2 #250. etl listed wet location. rated ip66. ce certification on request. dimensions luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 email: info@luminis.com 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis 1 1- white translucent high impact uv stabilized acrylic lens. 2- seamless extruded aluminum housing for electrical components (optional stainless steel). 3- cast aluminum mounting box. 4- optional downlight component with sealed optics. all stainless steel hardware. ada compliant CL314/cl324 series lumistik - led 3 wall jan 2018 rev.0 3 1 2 CL314/cl324 CL314 cl324 4 (102) 24 (610) 12 (305) 4 (102) 3.00 (75) lumistick 4 10.97 (279) 10.97 (279) type: quantity: project: catalog number: fixture wattage voltage finish option option option option
2 please visit our web site www.luminis.com for complete i.e.s. formatted download data. typical photometry summary model# CL314 luminaire selection standard colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne (refer to color chart) optional colors cs custom color ral ral# color ss3 #316 stainless steel body 120v 277v led light selection (4000k/80cri) voltage 1 finish options electrical light fs fuse alternate cct ok led (lcf: lumen conversion factor) k3 3000k cct 80 cri (lcf: 0.94) k35 3500k cct 80 cri (lcf: 0.983) note: other cct & higher cri available, please consult factory. downlight component & reflector 2 dl downlight (12w, 1078 delivered lumens) r26 26 o reflector optics (standard reflector) r40 40 o flood reflector optics ada compliant jan 2018 rev.0 mounting mt4 trim panel for octagonal box swk adaptor box for surface 3/4 conduit feed cl324 CL314/cl324 series lumistik - led suffix input watts delivered lumens l56w10 10w 830 suffix input watts delivered lumens l112w10 10w 830 l112w20 20w 1640 l112w30 30w 2250 notes 1- if no voltage is specified, luminaires are factory prewired by default for 120v. for other voltages, please specify with catalog number, or consult factory. 2- must select downlight component and reflector (otherwise 26 o reflector optics will be offered by default). downlight cct will match cct selected for fixture. CL314 cl324 luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 email: info@luminis.com 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis
|
